Information on all makes/models of bucket trucks

 

:::: ETI - Equipment Technology, LLC ::::Bucket Trucks

This information is directly sourced from ETI1.com

ETI is the fastest growing manufacturer of aerial lifts("Bucket
Trucks") in the world resulting from a dedication to
meet and exceed customer expectations. ETI is an integrated
manufacturer of both aerial devices and utility truck bodies.
This provides the advantage of a higher quality package
due to the integrated design of the body and the aerial lift.

Bucket Truck Rental

Insulated Aerial Lifts: ETI Articulating Aerial Lift

  • Continuous rotation is standard on all ETA units.
  • Full pressure hydraulic controls located at basket and turret w/ full feathering capacities from both upper and lower controls.
  • Positive chain and rod leveling based on parallelogram system ensuring long life and minimum leveling system maintenance.
  • Shear ball rotation gear driven by internal drive gear box. The gear box has an extended shaft for manual rotation.
  • Internal mounted holding valves (integral part of cylinder) lock cylinders in place in the event of hydraulic failure.
  • All pins turn on replaceable bushings.
  • Ability to access body compartments from basket.
ETA 29 ETA 33
ETA 37
Height to Bottom of Bucket* 29' 33' 37'
Working Height* 34' 38' 42'
Stowed Height* 9' 9" 9' 9" 9' 9"
* Based on 36" frame height
  • Continuous rotation is standard on all ETO units.
  • Full pressure hydraulic controls located at basket and turret w/ full feathering capacities from both upper and lower controls.
  • Positive chain and rod leveling based on parallelogram system ensuring long life and minimum leveling system maintenance.
  • Shear ball rotation with an extended shaft for manual rotation.
  • Internally mounted holding valves (integral part of cylinder) lock cylinders in place in the event of hydraulic failure.
  • All pins turn on replaceable bushings.

ETO 30 ETO 33 ETO 37
Height to Bottom of Bucket* 30' 33' 37'
Working Height* 35' 38' 42'
Stowed Height* 9' 9" 9' 9" 9' 9"
* Based on 36" frame height
  • Continuous rotation is standard on all ETO MH units.
  • Full pressure hydraulic controls located at basket and turret w/ full feathering capacities from both upper and lower controls.
  • Positive chain and rod leveling based on parallelogram system ensuring long life and minimum leveling system maintenance.
  • Shear ball rotation with an extended shaft for manual rotation.
  • Internal mounted holding valves (integral part of cylinder) lock cylinders in place in the event of hydraulic failure.
  • All pins turn on replaceable bushings.
  • 90 degree bucket rotator.
  • Single handle upper control.
  • Lower boom fiberglass insert.
  • Hydraulic winch & 5 ft. jib -- up to 1,000 lb. material handling capacity.
  • 24" x 30" basket.
  • 2 sets outriggers.
  • 400 lb. bucket capacity.Bucket Truck Accessories

ETA 40 MH
Height to Bottom of Bucket* 40'
Working Height* 45'
Stowed Height* 10' 8"
* Based on 36" frame height
 
  • Van mount units utilize a bridge frame in lieu of pedestal providing increased storage capacity and greater accessibility to van interior.
  • Shear ball rotation gear driven by internal drive gear box.
  • All pins turn on replaceable bushings.
  • Inner boom is actuated by a cylinder extension system.
  • Adjustable wear pads
  • Internally mounted holding valves (integral part of cylinder) lock cylinders in place in the event of hydraulic failure.
  • Upper controls recessed in fiberglass control panel
  • Lower controls accessible from the ground
  • Fiberglass inner boom
  • Single handle upper control with variable speed
  • Closed bucket with step
  • Continuous rotation is standard on all ETT units.
  • Full pressure hydraulic controls located at basket and turret with full feathering capabilities from both upper and lower controls.
  • Hydraulic leveling via master/slave system
  • Shear ball rotation gear driven by internal drive gear box. The gear box has an extended shaft for manual rotation.
  • Internally mounted holding valve (integral part or cylinder) locks cylinder in place in the event of hydraulic failure.
  • All pins turn on replaceable bushings.
  • Hydraulic Bucket / Tilt System

ETT 29INV
(Van Mounted)
ETT 28
(Truck Mounted)
ETT 29
(Truck Mounted)
ETT 30
(Truck Mounted)
Height to Bottom of Bucket* 29' 28' 29' 30'
Working Height* 34' 33' 34' 35'
Stowed Height* 9' 5" 9' 6" 9' 6" 10' 6"
* Based on 36" frame height (Trucks) or 84" cab height (Vans)
  • Continuous rotation is standard on all insulated ETC units.
  • Full pressure hydraulic controls located at basket and turret w/ full feathering capacities from both upper and lower controls.
  • Hydraulic leveling via master/slave system providing a bucket dump for clean out and operator rescue.
  • Shear ball rotation gear driven by external drive gear box. The gear box has an extended shaft for manual rotation.
  • Internally mounted holding valves (integral part of cylinder) lock cylinders in place in the event of hydraulic failure.
  • All pins turn on replaceable bushings.
  • Hydraulic cylinder extension of inner boom providing maximum clear span of inner boom for insulation.

ETC 37 IH
(Insulated)
Height to Bottom of Bucket* 37'
Working Height* 42'
Stowed Height* 10'
Rotation Continuous
* Based on 36" frame height


ETI provides a variety of optional features on Insulated Aerial lifts.
  • Emergency Hydraulic Power
  • Engine Start/Stop System
  • Hydraulic Tool Circuit
  • Two Speed Throttle
  • Single Handle Control
  • Bucket Liner
  • Bucket Cover
  • Oversize Bucket (24x30x42)
  • Hydraulic Bucket Rotator (ETT 28/29 & ETC Models Only)
  • Bucket Tilt-Rescue
  • End Mount Bucket (Select Units Only)
ETI manufactured equipment meets or exceeds OSHA, ANSI 92.2 and FMVSS standards at time of manufacture.

>